PORSCHE 930 REAR INCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 930 1975-77 - Front Axle/Steering (includes uncategorized and accessory items) 909278 Forged from the highest quality steel, each torsion bar is centerlessly ground to provide a constant spring rate, chemically coated to protect against rust and then matched in pair sets to ensure that both sides of the car are equally suspended. One needed for entire rear suspension. General Fitment911 1974-77930 1975-77 911 1978-83 911 1984-86 911 1987-89 912 1965-69
$363.18
Make a selection 909027 Forged from the highest quality steel, each torsion bar is centerlessly ground to provide a constant spring rate, chemically coated to protect against rust and then matched in pair sets to ensure that both sides of the car are equally suspended. One needed for entire rear suspension. General Fitment911 1974-77930 1975-77 911 1978-83 911 1987-89 911 1984-86 912 1965-69
$271.99
Make a selection 82101159S Koni has been in business for 150 years, involved in automobile dampers since 1932 and has produced adjustable telescopic dampers since 1945. A favorite among racers, and offered as a performance option by the factory. Konis are adjustable for fine tuning and carry a lifetime warranty. Koni sport shocks and struts provide a firm, controlled ride and flatter cornering and are also externally adjustable. These dampers can be adjusted, literally at the turn of a knob, a technique borrowed from formula-1 racing where koni dampers have dominated the field for years. Sold each, two needed per rear of vehicle. General Fitment930 1975-77911 1974-77 911 1978-83 911 1984-86 911 1987-89
$235.95
Make a selection 91133300900 Four piece set, heavy duty version General Fitment911 1974-77930 1975-77 911 1978-83 911 1984-86 911 1987-89
$29.75
Make a selection MB1112 The Porsche 911 came equipped from the factory for high performance cornering -- but some things have changed in the almost 40 years the 911 has been on the road. For one, the rubber suspension bushings that monoballs replace are most likely already worn out or cracked from decades of use. General Fitment911 1987-89911 1984-86 911 1978-83 930 1975-77 911 1974-77 911 1970-73 911 1965-69 912 1965-69
$425.95
Make a selection 901989 Forged from the highest quality steel, each torsion bar is centerlessly ground to provide a constant spring rate, chemically coated to protect against rust and then matched in pair sets to ensure that both sides of the car are equally suspended. One needed for entire rear suspension. General Fitment912 1965-69911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89
$363.18
Make a selection 9019898 Forged from the highest quality steel, each torsion bar is centerlessly ground to provide a constant spring rate, chemically coated to protect against rust and then matched in pair sets to ensure that both sides of the car are equally suspended. One needed for entire rear suspension. General Fitment912 1965-69911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89
$363.18
Make a selection ER2290002 Diy kit - rear 914 control arm rubber bushings are now available as a kit for self-installation. in addition to a complete set of 4 OEM spec rubber bushings, the kit includes proprietary installation tools and instructions, which are essential for successful installation plus the rear control arm shafts use a pipe clamp or shop press to complete the install. General Fitment914 1970-76911 1965-69 911 1970-73 911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89
$439.99
Make a selection STP221 This eccentric adjuster is needed to adjust the toe-in of rear suspension. General Fitment924 1976-79924 1980-85 924 1986-88 944 1989-91 944 1985-88 944 1982-85 911 1965-69 911 1987-89 911 1984-86 911 1978-83 930 1975-77 911 1974-77 911 1970-73
$39.95
Make a selection MB1230 The Porsche 911 came equipped from the factory for high performance cornering -- but some things have changed in the almost 40 years the 911 has been on the road. For one, the rubber suspension bushings that monoballs replace are most likely already worn out or cracked from decades of use. General Fitment911 1987-89911 1984-86 911 1978-83 930 1975-77 911 1974-77 911 1970-73 911 1965-69 912 1965-69
$273.90
Make a selection B460975 Bilsteins are original equipment on many Porsches and have won, for Porsche, countless races. Bilsteins are the highest quality shocks made and will last the lifetime of your Porsche. Bilstein sport shocks and struts are for the performance minded driver. Bilstein sport units deliver absolute mastery of the road surface. Designed to push a car's suspension to its performance peak, these super-firm units are well suited for use with special springs, anti-sway bars, and other suspension upgrades. As with other bilstein units, sports are uniquely self-adjusting. Sold each, two needed for the rear of your vehicle. General Fitment911 1974-77930 1975-77 911 1978-83 911 1984-86 911 1987-89 911 1970-73
$227.28
Make a selection 993014340 Your suspension is only as good as the bushings. Over time, factory rubber bushings deteriorate, allowing the suspension to become loose and sloppy. Daystar poly graphite bushings last years longer than standard bushings, and bring back suspension performance. Available in performance, which are much stiffer and race-ready. Set of 4 bushings for the front and rear of the front a-arms. General Fitment911 1965-69911 1970-73 911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89 912 1965-69 914 1970-76
$31.89
Make a selection B460169 Bilsteins are original equipment on many Porsches and have won, for Porsche, countless races. Bilsteins are the highest quality shocks made and will last the lifetime of your Porsche. Bilstein heavy-duty shocks and struts provide improved handling and stability without sacrificing the ride. Their superior damping ability makes them ideal for spirited driving while still maintaining an exceptional "street" feel. As with all bilsteins, these units instantaneously self-adjust to changing road surfaces. In addition, their performance does not gradually decline from age, use or heat - requiring no compensating manual adjustments as with conventional multi-tube units. Sold each, two needed for the rear of your vehi...(choose a part on the right to read more) General Fitment911 1974-77930 1975-77 911 1978-83 911 1984-86 911 1987-89 911 1970-73
$217.10
Make a selection 10050305503GFK Made in europe by one of the manufacturers to Porsche. Extremely high-quality grp (glass-reinforced plastic) rear bumper that includes every detail for a perfect fit. Features: - produced by an OEM manufacturer. - highest quality standards. - perfect fitment. - lightweight 9.7 lbs. (4.4 kg) - made of high strength, grp (glass-reinforced plastic) sold individually. 1 necessary per car. Please note: this only fits in conjunction with widebody / rsr rear fenders, part # FVD503930001 . Please provide us with the year / model. These are high quality parts that take time to manufacture and cure properly. Lead times can vary anywhere from 15-30 days depending on where you are in the world. All grp products must proper...(choose a part on the right to read more)
$1,265.00
Make a selection 100555100RSSC This is a rear lightweight carpet kit for a rs model or a rs tribute, without back seats. This set is made from German lightweight felt and does not include floormats. Features: genuine German lightweight felt trimmed in vinyl made in Germany custom made to order manufactured in Germany sold as a rear set. 1 necessary per car. Please note: when placing your order, we require the year, model and a list of any interior upgrades like roll bars, etc. This kit is custom made to order.
$940.50
Make a selection 0PB105249 Shaft sealing ring for the crankshaft to the flywheel side.
From $22.10
Make a selection 100555110NFB This is a rear lightweight carpet kit for a rs model or a rs tribute, without back seats. This set is made from German nadel filz. We go to extra lengths to ensure that our carpets are made as closely to the originals as possible. Each is cut, sewn and trimmed to fit perfectly. Details: German nadel filz (needle felt) trimmed in vinyl made in Germany custom made to order sold as a set. 1 necessary per car. Please note: when placing your order, we require the year, model and a list of any interior upgrades like roll bars, etc. This kit is custom made to order.
$1,096.70
Make a selection 10050330000 This 9 inch front and 11 inch rear steel fender flare set is made in Germany, we offer a complete line of replacement bodywork to complement the entire Porsche model range. Sold individually. 1 necessary per car. Please note: for conversions, these flares will allow you to run 9 wide tires in the front and 11 wide in the rear. For the 964 / 965 models the torsion bar cut out must be filled. Due to variances in production at the factory, age, accident damage or rust, each part may require trimming and or adjustment for perfect fitment.
$1,648.90
Make a selection 115169
$282.70
Make a selection 1151547
$342.10
Make a selection 115174
$267.30
Make a selection 115167 Bilstein gas pressure shock absorber rear - OEM setting
$253.00
Make a selection 1151735
$344.30
Make a selection 100555112NB German lightweight sliverknit rear seat delete / rear shelf carpet that was used on the 964 and 993 rennsport models. We go to extra lengths to ensure that our carpets are made as closely to the originals as possible. Each carpet is made with original lightweight German sliverknit and are trimmed in vinyl. Each is cut, sewn and trimmed to fit perfectly. Made in Germany. Sold individually.
$1,151.70
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |